|Armstrong Magnetics, Inc.||
(800) 965-4968 | firstname.lastname@example.org | Shopping Cart
EPB-3000 Remote Control (Optional)
Model - EPB-3000
Part Number: 88130
Max. Lift Capacity: 3,000 lbs
Request For Quote
EPB-3000 is manufactured and certified in accordance with ASME standard B30.20.
Battery activated with minimum energy consumption:
Electro permanent lifting magnet system has an internal battery, which uses the electricity for less one second to activate or deactivate lifting power. The magnet doesn’t need any battery power after it is activated. The battery can work for up to 300 operational cycles of MAG - DEMAG (magnetize and demagnetize).
After clicking on the MAG button, a partial magnetization is processed and therefore a partial lifting capacity is achieved. A few seconds after the lifting magnet and the load are lifted off of the ground (or the hoisting rope has a tension), a full magnetization is processed automatically and lifting magnet then reaches its full lifting capacity.
With this special mechanism, as long as the lifting magnet can lift the load from ground with its partial capacity, a full magnetization or lifting capacity is more than sufficient for safe lift of the load. This precautionary design enhances safer lifting operations.
|Lifting capacity can be selected in 3 levels:
Adjust the lifting capacity in 3 levels, MAX, MID and MIN, by turning the knob of ADJUST LIFT CAPACITY. In the case that the lifting magnet lifts more than one steel sheet from a stack at a time, you can adjust its lifting capacity to a weaker level in order to lift one sheet only. With the options of three levels of lifting capacities, individual thin metal sheet can be lifted from its stack. Otherwise the lifting capacity should always be set at MAX.
Convenient control at the control panel and/or by a wireless remote control (optional):
The electro permanent lifting magnets can be operated at its front panel, and/or by a remote control.
Demagnetization lock after lifting magnet lifts load:
When the electro permanent lifting magnet lifts the load off of the floor, its lifting power cannot be switched off by clicking on any control button.
Light warning if there is no full magnetization or demagnetization.
DEMAG for safe operation:
For more safety ensurance, you would have to press on both the DEMAG and UNLOCK DEMAG buttons simultaneously to demagnetize EP-B electro permanent lifting magnet and release loads.