| |
|
|
|
Your current position:
Home > Products > Permanent Lifting Magnets |
 If you are interested in
distribution Armstrong LiftMag™,
please fill and submit the
Distributor Application Form
|
Armstrong LiftMag™
The Armstrong Lift Magnets are designed and made for powerful lifting and safe use. These compact lift magnets are
used for holding, carrying and releasing round or flat ferrous parts
without any electrical power supply.
Safe and easy
operation:
The handle controls an inner magnetic system for safe and easy operation.
When the handle is in the "off" position the Lift magnet has
almost no magnetic pull. After you press a button on the
top of the handle and turn it to the "on" position, the lift magnet
will have attracting pull to a steel load. For more safety, the handle has been
locked at this position by a "Lock Pin" and the lift magnet will keep full magnetic
pull until you manually slide back the Lock Pin
and turn the handle back to the "off" position.
Compact yet
powerful:
Thanks to Neodymium magnet and special magnetic design, the Lift Magnets
have small size and light weight compared to the powerful lift
capacity.
Constant and
stable magnetic power:
The Lift Magnets have high resistance to demagnetization and is
shielded from outside magnetic interference with mild steel case.
The lifting value will keep constant and stable.
Disadvantage:
The Lifter can only used below 148°F.
It will lose it lifting power above this temperature. It is not good to
lift a thin steel plate, particularly not good to lift a thin sheet from a stack
of plates.
|
|
|
|
Pull Off Testing before shipping |
|
|
|
|
|
|
