Armstrong LiftMag™
How to choose a suitable model of the
lifting magnets?
Instruction Manual of NL-B Lifting Magnets
If you are still not very sure which model would be applicable for your
use, please fill
"Lifter Application Data Form"
and submit to us.
Features:
Thicker front Aluminum cover to protect rotor shaft head.
Main body is Nickel plated to make the body anti-rust and pole face hardened.
SafeLift™ Pretest Mechanism to test safety of a lifting process you are
going to operate.
|
|
SafeLift™ pretest mechanism:
Safer than our competitors' lifting magnets by pretesting lifting
safety.
In some complicated situations it is difficult to estimate the actual
lifting value with enough safety coefficient and consequently you are
not sure if the lifting operation is safe or not, then you can take the
following steps to get a safer lifting operation.
1. Place the lifting magnet at the load.
2. Turn the handle counterclockwise to the vertical position.
3. Insert the tip of the screw driver shipped with the lifting magnet
into a small hole at the yellow cover to hold the handle in the
position.
4. Lift the lifting magnet and the load 2”-3” from the floor.
5. If the load can be lifted, place the load back onto the floor.
6. Take off the screw driver and turn the handle to ON position. The
handle is locked by the slide pin.
7. Lift the load again. This time the safety coefficient is 2 at least.
Thicker front Aluminum cover to protect rotor shaft head
Main body Nickel plated.
NL-B Wooden Package
Wood box is necessary for shipping heavy goods. |
