Pages
[1] [2] [3] [4] [5]


Developing New Magnetic Plate Lifters

Global Output of Neodymium Magnets in 2015

Control Box for Mains Electricity Activated Electro Permanent Lifting Magnet System

Procedure for Mains Electricity Activated Electro Permanent Lifting Magnets

Services Included with NL-B Lifting Magnets Purchases

Armstrong Stand Behind Our Lifting Magnets and Services

Twice Magnetizing Electro Permanent Lifting Magnets

Stainless Steel Cup Magnetic Assembly RB-80SS

Impact of Air Gap on Lifting Capacity of Lifting Magnets

Module of Electro Permanent Lifting Magnet System for Thin Plate

Repair Permanent Lifting Magnets

The Main Causes of Permanent Lifting Magnets Damage

Custom and Standard Magnetic Assembly

Bonding Technique for Magnetic Assembly

Types of Lifting Magnets

The Maximum Length of a Sheet Metal to be Lifted by Lifting Magnet PL-550 or PL-1100

Recertification for NL-B Permanent Lifting Magnets

Vulnerable Parts of Lifting Magnets

Limited Lifetime Warranty for NL-B Lifting Magnets

Lifting Thin Plates using Permanent Lifting Magnets

Wireless Remote Control fro Electro Permanent Lifting Magnets

Control Box for Battery Activated Electro Permanent Lifting Magnet System

Lifting Magnets End Plate

Solid Handles for Lifting Magnets

Titanium Nitride Coated Neodymium Magnets

Micro-sized Samarium Cobalt Magnets

Phone Service for New Customers

High Heat-Resistant Electro Permanent Lifting Magnets

Magnetic Lifter for Large, Thin Sheet Metal

Evolution of Armstrong Permanent Lifting Magnets

 

News and Blogs

Developing New Magnetic Plate Lifters
We will be supplying new products, magnetic plate lifters model PL-660 and PL-1320, in the near future to replace our current PL-500 and PL-1100...

Global Output of Neodymium Magnets in 2015
In 2015 manufacturers all over the world produced a total of 143,000 tons of Neodymium magnets, including sintered Neodymium magnets and bonded Neodymium magnets...

Control Box for Mains Electricity Activated Electro Permanent Lifting Magnet System
EP-C30 controls a magnetizing and demagnetizing current pulse for models of electro permanent lifting magnets or lifting systems...

Procedure for Mains Electricity Activated Electro Permanent Lifting Magnets
EP-C30 is the control for Mains Electricity Activated Electro Permanent Lifting Magnets or a lifting system with a few modules...

Services Included with NL-B Lifting Magnets Purchases
The time you place an order for NL-B lifting magnets is not the end of the transaction between Armstrong Magnetics and you, it is the starting point of our service for you...

Armstrong Stands Behind Every NL-B Lifting Magnet for Its Lifetime
During this period we take full responsibility to repair the NL-B lifting magnets or supply any parts for replacement, due to defects in the materials or workmanship, with no any charges...

Twice Magnetizing Electro Permanent Lifting Magnets for Maximum Lifting Safety
Armstrong's Twice Magnetizing (Partial and then Full magnetizing) mechanism should be simple and reliable...

Stainless Steel Cup Magnetic Assembly RB-80SS
The steel cup of RB-80SS is made of Ferritic Stainless Steel. It has excellent resistance to a wide variety of corrosive environments, including nitric acid and some organic acids...

Impact of Air Gap on Lifting Capacity of Lifting Magnets
The lifting capacity of any permanent lifting magnets decreases with increases in air gap, but the decreasing rate can vary among different brand products...

Module of Electro Permanent Lifting Magnet System for Thin Plate
Our new product, MS99-12V, is a module for Battery Activated Electro Permanent Lifting Magnet system...


Repair Permanent Lifting Magnets
In order to repair the parts of the rotor of permanent lifting magnets of any brands, Armstrong Magnetics set up a special equipment which works efficiently and safely for this job...

The Main Causes of Permanent Lifting Magnets Damage
The biggest cause of lifting magnet damage is collision against other heavy objects...

Custom and Standard Magnetic Assembly
The three parts are assembled together to build a magnetic assembly for purpose of getting a strong holding to a ferromagnetic load or establishing a magnetic field in a given space...

Bonding Magnets and Metals to Compose Magnetic Assembly
In order to build an optimal adhesive joint between magnets and metals for a magnetic assembly, a detailed bonding process must be set up in advance...

Types of Lifting Magnets
Even though there are so many different appearances, brands and lifting capacities of lifting magnets, they can be divided into two major categories according to the kinds of their magnetic field sources...

Maximum Length of a Sheet Metal for Plate Lifting Magnet
When a PL-550 or PL-1100 lifting magnet lifts a sheet metal, the unsupported overhang of the sheet metal would bend due to gravity and possibly peel off from the lifting magnet when the sheet metal is too big and too thin. ...

Recertification for NL-B Permanent Lifting Magnets
The deteriating phyical state should be less of concerns, but most importantly, the lifting magnet operational functionality should be examined periodically.. ...

Vulnerable Parts of Permanent Lifting Magnets
A good permanent lifting magnet should be working well for many years when it is always used in accordance with its operation manual. ...

Limited Lifetime Warranty for Armstrong NL-B Series Permanent Lifting Magnets
Should your lifting magnet ever malfunction from defects in workmanship or materials, we will repair or replace the product free of charge...

Thin Plate Lifting by Using Permanent Lifting Magnets
If you are planning to buy a permanent lifting magnet to lift a thin plate of ¼” or thinner...

Wireless Remote Control for Electro Permanent Lifting Magnets
EPRC-3 wireless remote control is used for switching on and switching off the magnetic holding force of Armstrong Electro Permanent Lifting Magnets...

Control Box for Battery Activated Electro Permanent Lifting Magnet System
EPB-C30 is used as a magnetizing and demagnetizing current controller for all models of lifting system...

New End Plates for NL-B Armstrong Lifting Magnets
Since 2015 we supply NL-B series lifting magnets with new end plates which are made of Aluminum alloy...

Solid vs. Tubular Handles for Permanent Lifting Magnets
On the market of permanent lifting magnets there are two types of the handles...

Titanium Nitride Coated Neodymium Magnets
Titanium Nitride (TiN) has good chemical stability and corrosion resistance...

New Inventories - Micro Sized Samarium Cobalt Magnets
We recently set up a new stock of Samarium Cobalt magnets of small disks 0.039” Dia. X 0.020”...

Phone Service for New Armstrong Lifting Magnets Customers
If you order Armstrong lifting magnets the first time, we will call you before shipment...

High Heat-Resistant Electro Permanent Lifting Magnets
In order to lift hot plates from fire cutting table, we designed and fabricated High Heat-Resistant Electro Permanent Lifting Magnets which can work with loads of a temperature up to 500^oF...

Magnetic Lifter for Large, Thin Sheet Metal
As per a customer requirement, we designed and made a custom magnetic lifter for lifting 8’ x 4’ with thickness of 20 gauge to 12 gauge...

Evolution of Armstrong Permanent Lifting Magnets
Since 1999, Armstrong Magnetics has always been continuing to improve the reliability and durability of lifting magnets by adopting new magnet materials, new assembly construction and new workmanship...



Pages: [1] [2] [3] [4] [5]